So I dropped my TS-80 portable soldering iron on the tile kitchen floor last week, and broke the glass covering the OLED. It still works, but it spooked me, because of #badgelife and the upcoming Defcon trip. Very bad timing. I wanted to make sure I had a backup in case we need to fix anything on the fly, or solder new stuff, etc.
I looked into getting another one, because I’ve been pretty happy with it, but then I found some posts touting the PINECIL. At about 1/3 the price of the TS-80, supports open firmware and custom logos just like the TS-80 and TS-100, and pretty well-reviewed.
So I got a PINECIL. It showed up last week. I plugged it into the same battery pack I’ve always used for my TS-80 (since fall 2018!), and it reported low voltage. Looked into it, and it turns out the PINECIL needs more juice than something made in 2018 can push. From multiple sources, the PINECIL really works its magic when it’s getting 60W at 20V. So now I need a new battery to power my new iron.
You should totally buy one. It’s just $35. https://amzn.to/3lqKDlp
I spent a couple hours looking at battery packs, specs, reviews, the whole bit. I finally settled on the EasyLonger model. 65W USB-C PD, 10000mAh. It’s important to stay below around 30000mah if you want to take it on a flight with you.
First test, fires right up, pumps the iron right up to the optimal temperature.
You should totally buy one, it’s about $55. https://amzn.to/2VhXpIj
Also get a high-capacity USB-C cable. The one I got is rated for 5A.
You should totally buy one. https://amzn.to/3xp9CrM